Eskaro is a part of
international group
Eskaro Group AB
Aktivare Solvent

Mööblilakk 15

Water-borne acrylate varnish for furniture
  • Semi-matt
  • Resistant to scratching
  • Does not discolour to yellow
  • Protects the surface from moisture and dirt
  • Can be tinted
  • Suitable for children's furniture and toys
Download Technical Data Sheet
  • Description
  • Specifications
  • Information
  • Request SDS

Properties

Water-borne acrylate varnish for furniture and other indoor wooden surfaces.
  • Maintains and emphasises the natural beauty of the wood by providing a transparent semi-matt coating
  • Easy to apply; spreads evenly over the surface
  • Does not leave streaks when applied to vertical surfaces
  • Dries and reaches peak hardness quickly
  • Suitable for children's furniture and toys (accordance with EN 71-3)
  • Durable. Withstands mechanical loads and extensive use
  • Resistant to wear and scratching
  • Forms a coating which is resistant to washing with household detergents
  • Odourless
Maximum permissible EU VOC content for the product (subcat e): 130 g/L. Maximum VOC content in the product ˂130 g/L
Gloss:
  • semi-matt (approximately 15 (60°) in accordance with EN13300

Purpose

To be used for furniture (tables, chairs, shelves, etc.) and other wooden surfaces (panel walls, wooden ceilings, doors, window frames, baseboards, plywood and wood veneer products, etc.) and for the protection of painted or stained surfaces.
Do not use for treating floors or steam rooms.

Types of surfaces for varnishing

Wooden surfaces.

Quality standards

  • EN 13300 [Paints and varnishes. Water-borne coating materials and coating systems for interior walls and ceilings. Classification] – classification standards of coverage, gloss level and wet abrasion resistance parameters for water-borne coating materials for interior walls and ceilings.  
  • ISO 11 998 [Paints and varnishes -- Determination of wet-scrub resistance and cleanability of coatings], ISO 2813 [Paints and varnishes -- Determination of specular gloss of non-metallic paint films at 20 degrees, 60 degrees and 85 degrees] – techniques for measuring gloss and wear resistance parameters. 
  • VOC (volatile organic compounds) – content in accordance with the European Union directive 2004/42/CE.  
  • PProduct and service quality is guaranteed by the quality, environmental protection, occupational health and safety management system in accordance with standards ISO 9001:2015; ISO 14001:2015 and ISO 45001:2018.
Machine tinting 39 shades!

Surface preparation before varnishing

The surface must be clean and dry. Wood moisture content must not exceed 12%.
Previously untreated surfaces. Clean the surface from dirt, dust or grease. Before application, spray wooden surfaces with water, let them dry and sand the wood fibers which have risen.
Previously varnished surfaces. Sand thoroughly until the surface is matte. Fully remove peeling old coating. Use the OPS Pro product for the removal of old varnish coatings if necessary. Then prepare he surface in the same way as untreated surfaces.

Application

Stir the varnish thoroughly before application and keep stirring it regularly during the working process to spread tinting pastes and the matt agent evenly.
If necessary, the varnish can be diluted with water in the amount of 20% of its volume for the first coat. Application in the conditions of exposure to direct sunlight, draughts and high temperature can cause surface defects.
We recommend applying 2–3 coats of varnish along the grain without stopping from one edge of the surface to the other at the temperature between +10°C and +27°C and at relative humidity not over 80%. 
Sand the surface slightly and remove dust before applying another coat.
The colour of the surface coated with tinted varnish depends on the species and hue of the wood and the number of varnish coats. Before applying tinted varnish, we recommend making a swatch on a separate board to check the tint.

Care for the varnished surface

The coating reaches its peak hardness in about 3 weeks; in the meantime, treat the surface with care until its hardness and wash resistance have reached their peak levels.
If necessary, the surface can be lightly wiped with a soft sponge or cloth approximately 48 hours after varnish application.
We recommend using water and neutral or medium alkaline detergents (pH below 9) for cleaning. Do not use organic solvents, abrasive cleansers and hard scrubbing brushes or sponges. The coating is resistant to solutions of detergents in water, to oils and greases, and exposure to weak solvents (gasoline, white spirit). Make sure to remove stains from coffee, tea, fruit juices and other colouring liquids immediately!

Tools

Varnish brush, varnish roller.

Tool cleaning

Wash with soap and water after completing work.

Colour

White, transparent after drying

Tinting

Machine tinting according to the Eskarocolor system

Consumption

8-10 m²/L

Drying time

Dust-free drying time: 0.5 hour; at the temperature of +20 °C and the relative humidity of 65%, the surface is ready for the application of another coat in 2…3 hours. If the temperature is lower and the humidity is higher, the drying takes longer accordingly. The varnish coating reaches its peak hardness and durability in about three weeks. In the meantime, avoid loading the surface, vigorous cleaning or contact of the surface with hot or sticky objects. At lower
temperature and higher humidity drying will take longer.

Safety precautions

The product is not classified as dangerous according to CLP Regulation (EC) nº 1272/2008.  Contains 1,2-benzisothiazol-3(2H)-one, 2-methylisothiazol-3(2H)-one, reaction mass of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol-3-one.  May produce an allergic reaction.  If medical advice is needed, have product container or label at hand. Keep out of reach of children. Do not eat or drink during the process, washing hands afterwards with suitable cleaning products. As a preventative measure it is recommended to use basic Personal Protection Equipment, with the corresponding <<CE marking>> in accordance with Directive 89/686/EC.

Waste treatment

Dispose of the contents/containers in accordance with the current legislation on waste treatment. Waste treatment methods: code 08 01 12- Waste paint and varnish other than those mentioned in 08 01 11, waste class (Regulation (EU) No 1357/2014): non-dangerous.

Volume / weight

0,45 L - 0,9 L – 2,7 L

Warranty period of storage

Frost resistance

None

Density

1,03 kg/L

Storage conditions

Store and transport in undamaged containers at the temperature between +5…35 °C. Protect from freezing and direct sunlight.
Send us a message







Related products