Sympatia

Deep-matt slow-drying ceiling paint

Perfect result: no lap marks on the ceiling
High opacity
Smooth white coating

Colour: White.

Consumption: 8-12 m2/L

Drying time: The surface is ready for the application of another coat in 1–2 hours. At the temperature of +20 °C and the relative humidity of 65%, the surface is fully dry in 4 hours.

Volume / weight: 0,95L – 2,85L – 4,75L – 9,5L – 19L

Product information

Properties

Water-borne ceiling paint.

Excellent opacity.
Provides a white absolutely matt non-reflective coating.
Slow drying allows the surface to be treated for a longer period of time and the paint to be rolled on more thoroughly to provide a uniform coating without visible boundaries.
Stripes retain a wet edge, which ensures a uniform coating without lap marks.
Almost odourless
Does not affect the natural breathability of the surface
Suitable for sensitive and allergic people

Maximum permissible VOC content for the product (subcat. a): 30g/L; maximum VOC content in the product: < 30 g/L.
Gloss:

deep-matt (approximately 2) in accordance with EN 13300.
group 6 in accordance with RYL 2012.

Wash resistance:

class 4 in accordance with EN 13300 (ISO 11998).
groups 211 and 212 of painting regulations in accordance with RYL 2012.

Purpose

Primary and maintenance painting of ceilings in residential rooms and public areas with normal humidity.
For painting jobs in adverse conditions (draughts, the use of heating appliances, high air temperature or low air humidity) as well as for painting large areas with peculiar lighting (long corridors, side lighting).

Types of surfaces for painting

New or previously painted concrete, aerated concrete or gypsum board surfaces as well as surfaces finished with putty or plastered.

Surface preparation before painting

The surface to be painted must be carefully cleaned from loose or peeling material, dirt, grease and dust. Remove old chalk surface completely. Sandpaper durable alkyd substrates until they are matt and remove the dust thoroughly. If the surface is very dirty, wash it with EasyClean. Use a Fine Filler putty to fill cracks and dents or smooth the surface. We recommend using Fine Pro Filler as the finishing layer to even out the surface. Use Aquastop to prime surfaces that give up dust and surfaces with uneven absorption. Follow the product instructions for use.

Application

Stir the paint thoroughly before ap plication. Apply 1– 2 coats with a roller (pile length: 10–14 mm), airless spray gun (nozzle: 0.017 – 0.021”) or brush at the temperature between 10 and 25 °C and relative humidity below 80%. If the airless spray gun is used, the paint can be diluted with water in the amount of 6% of its volume. Try to maintain a wet edge in the process of painting.

Tool cleaning

Wash with soap and water after completing work.

Storage conditions

Store and transport in intact containers at the temperature between +5 °С and +35 °С. Protect from exposure to freezing and direct sunlight.

The information concerning the product is based on the results of laboratory tests and practical use of the product depending on the location and conditions of its use. As the manufacturer, we guarantee the quality of the product and provide the best recommendations for its appropriate application. As the manufacturer, we cannot control the conditions and circumstances of product transportation, storage and application and numerous other factors that affect its use. Thus, we shall not bear responsibility for the damage caused by ignoring the instructions for use or transportation, by noncompliance with storage conditions and timeframes or by inappropriate application of the product. The manufacturer reserves the right to alter product information at their discretion without prior notice.

Cost calculator