Fully matt washable interior paint
Colour: White; ready made color: black
Consumption: 6-10 m²/L each coat, the actual paint consumption depends on the substrate and the painting method.
Drying time: At the temperature of +23 °C and the relative humidity 50%, the surface is dust dry after 30 minutes and ready for the application of another coat in 2 hours. The coating reaches its peak wash resistance in 4 weeks
Volume / weight: 0,95L – 2,85L – 9,5L
Water-borne absolutely matt paint for painting walls and ceilings indoors.
Maximum permissible VOC content for the produc (subcat a): 30 g/L. Maximum VOC content in the product ˂30 g/L
Gloss:
Wash resistance:
For painting walls and ceilings in dry and demanding rooms, where a strong, fully matte washable surface is required. Places of use: living and social spaces, salons, conference halls, meeting rooms, offices, lobbies, hotels, boudoirs, etc. Not suitable for painting floors, doors and furniture.
Previously painted or newly prepared for painting concrete, plaster, plasterboard, building block, fiberboard and chipboard surface, paintable wallpaper, etc. For indoor use.
Previously unpainted surfaces: clean the surface, removing dirt and dust. Apply a suitable putty from the FILLER line to even out the surface if necessary. After drying, sand the filled surface to make it even and remove sanding dust. Prime filled, porous or unevenly porous surfaces with Aquastop moisture barrier. Prime the surfaces with water-borne priming paint Flat to even out the surface absorption capacity, increase the durability of the painted surface and decrease the consumption of the top coat paint.
Previously painted surfaces: the painted surface must be cleaned from loose and peeling material, grease, dust and other impurities. If mould removal is necessary, use Biotol E or Biotol Spray. To clean the surfaces that are very dirty or have soot, water, nicotine or grease stains, wash the surface with Easy Clean. Then prime with the isolating paint Objekt. Before painting durable old alkyd surfaces, sand them until they are matt and remove sanding dust thoroughly. Use a putty from the FILLER line to fill cracks, holes and uneven areas. Sand the filled surface to make it even and remove sanding dust. Prime filled surfaces with Aquastop or Tiefgrund moisture barrier to reduce porosity. Prime the surfaces with water-borne priming paint Flat to decrease the consumption of the top coat paint and improve coverage. Please follow the product application manual.
Stir the paint thoroughly before application. We recommend mixing tinted paint in one package. Apply 2 coats with a roller or spray gun at the temperature between 10 °C and 20 °C and relative humidity not exceeding 80%. When using a spray gun, you can dilute the paint with water in the amount of up to 6% of its volume. Apply the finishing coat, using undiluted paint. Avoid application in draughty places and at high air temperature (over +25 °C). When painting, make sure to keep a wet edge. In case the paint job is carried out in adverse conditions (draughts, the use of heating appliances, high temperature or low air humidity), we recommend using the Time+ slow-dry agent in the amount of up to 3% of the paint volume (mix 0.33 L of Time+ into 9.5 L of paint). Please follow the product application manual.
The surface may be washed after 4 weeks from the time of painting, as during this period it reaches its final hardness and wear resistance. If earlier cleaning is required, it must be done carefully using a dampened soft sponge or cloth, but not earlier than 48 hours after painting. After 4 weeks, the surface can be washed using a soft sponge or cloth. For cleaning painted surfaces, use water and, if necessary, neutral or mildly alkaline detergents (pH up to 9). Do not use cleaning agents containing organic solvents. To remove mould, use Biotol E or Biotol Spray. Follow the instructions for use of these products. Do not use abrasive cleaners or rough sponges or brushes. Avoid intensive spot cleaning. Strong rubbing may cause the surface to become glossy. The surface should be washed over the entire wall area, from corner to corner, from top to bottom, with even pressure. After washing, rinse the surface with clean water and dry it. In rooms where high wear resistance is expected, we recommend using silk-matt or higher gloss paints.
Roller, airless spray gun, brush.
Wash with soap and water after completing work.
Contains 1,2-benzisothiazol-3(2H)-one2-methylisothiazol-3(2H)-one, Reaction mass of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol-3-one (3:1). May produce an allergic reaction. If medical advice is needed, have product container or label at hand. Keep out of reach of children.
Avoid release to the environment. Do not dispose of paint or rinse painting tools in sinks or drains. Dispose of the contents/containers in accordance with the current legislation on waste treatment. Waste treatment methods: code 08 01 12- Waste paint and varnish other than those mentioned in 08 01 11, waste class (Regulation (EU) No 1357/2014): non-dangerous
Store and transport in intact containers at the temperature between +5…30°С. Protect from exposure to freezing and direct sunlight.
The information concerning the product is based on the results of laboratory tests and practical use of the product depending on the location and conditions of its use. As the manufacturer, we guarantee the quality of the product and provide the best recommendations for its appropriate application. As the manufacturer, we cannot control the conditions and circumstances of product transportation, storage and application and numerous other factors that affect its use. Thus, we shall not bear responsibility for the damage caused by ignoring the instructions for use or transportation, by noncompliance with storage conditions and timeframes or by inappropriate application of the product. The manufacturer reserves the right to alter product information at their discretion without prior notice.
Consumption is calculated for 1 layer
