Matt wall & ceiling paint
Colour: White
Consumption: 7…12m²/L
Drying time: At the temperature of +20 °C and the relative humidity of 80%, the surface is ready for the application of another coat in 2–2,5 hours. The surface is fully dry in 12 hours. The coating reaches its peak wash resistance in 4 weeks.
Volume / weight: 0,9L – 2,7L – 9L – 18L
Waterborne, matt paint for walls and ceilings in rooms with high performance requirements in dry and humid conditions.
Maximum permissible VOC content for the product (subcat a): 30 g/L; maximum VOC content in the product: <30 g/L.
Gloss:
Wash resistance:
Painting walls and ceilings in rooms with high-performance requirements (kindergartens, schools, universities, libraries, hotels, offices, stairwells, and other social and housing quarters). Not suitable for painting floors, doors, and furniture.
Surfaces previously painted with latex, alkyd, or oil-base paints or new surfaces made of concrete, aerated concrete, gypsum board; or brick; surfaces finished with filler or plastered and surfaces covered with glass fiber wallpaper or other rolled finishing materials. For interior use.
The surface to be painted must be carefully cleaned from loose or peeling material, dirt, grease and dust. If mould removal is necessary, use Biotol E or Biotol Spray. Sandpaper durable alkyd substrates until they are matt and remove the dust thoroughly. If the surface is very dirty, wash it with EasyClean. Use a putty from the FILLER line to fill cracks, holes and uneven areas. Sand the filled surface to make it even and remove sanding dust. Prime filled surfaces with Aquastop or Tiefgrund moisture barrier to reduce porosity. To reduce consumption, we recommend using Esk Pro 3 or Flat for priming. Follow the product instructions for use.
Stir the paint thoroughly before application. Mixing tinted paint in one container is recommended. Apply 2 coats with a roller or spray gun at the temperature between +10 °C and +25 °C and relative air humidity below 80%. When using a spray gun or for the application of the first coat, dilute the paint with water in the amount of 5% until it reaches working viscosity. Apply undiluted paint for the finishing coat. Avoid application in drafty places and at high air temperature (over +25 °C). When painting, make sure to keep a wet edge. If you must work in unfavorable conditions (drafts, heating devices, high temperature, low humidity), we recommend adding the TIME+ drying time extender (up to 3% of the paint volume). When painting corners, filled with acrylic sealant, wait until it dries completely. Follow the product instructions for use.
The coating reaches its peak wash resistance in 4 weeks; treat the surface with care until its hardness and wash resistance have reached their peak levels. If necessary, the surface can be lightly wiped with a soft sponge or cloth approximately 48 hours after paint application. We recommend using water and neutral or mildly alkaline detergents (pH below 9) for cleaning. Do not use organic solvents, abrasive detergents or stiff brushes and rough sponges. Excessive rubbing may make the surface glossy. Use soft sponges and cloths for cleaning. Wipe the surface dry after wet cleaning. Use Biotol E and Biotol Spray to remove mould. Follow the product instructions for use.
Roller, airless spray gun (nozzle: 0.017–0.021”), brush.
Wash with soap and water after completing work.
Warning! Hazardous respirable droplets may be formed when sprayed. Do not breathe spray or mist. Contains 1,2-benzisothiazol-3(2H)-one, 2-methylisothiazol-3(2H)-one, reaction mass of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol-3-one (3:1). May produce an allergic reaction. Keep out of reach of children.
Avoid release to the environment. Dispose of the contents/containers in accordance with the current legislation on waste treatment. Waste treatment methods: code 08 01 12- Waste paint and varnish other than those mentioned in 08 01 11, waste class (Regulation (EU) No 1357/2014): non-dangerous.
Store and transport in a tightly sealed container at the temperature between +5…30 °С. Protect from exposure to freezing and direct sunlight.
The information concerning the product is based on the results of laboratory tests and practical use of the product depending on the location and conditions of its use. As the manufacturer, we guarantee the quality of the product and provide the best recommendations for its appropriate application. As the manufacturer, we cannot control the conditions and circumstances of product transportation, storage and application and numerous other factors that affect its use. Thus, we shall not bear responsibility for the damage caused by ignoring the instructions for use or transportation, by noncompliance with storage conditions and timeframes or by inappropriate application of the product. The manufacturer reserves the right to alter product information at their discretion without prior notice.
Kulu arvutatakse 1 kihile