Eskaro is a part of
international group
Eskaro Group AB
Aktivare Solvent

Windoora Plus

Window and door paint
  • Water-borne
  • Semi matt
  • Quick drying

Download Technical Data Sheet
  • Description
  • Specifications
  • Information
  • Request SDS


Water-borne enamel for windows and doors.
  • Creates and ideally smooth semi-gloss coating
  • The unique “Core-Shell” acrylic dispersion gives the paint excellent adhesion
  • Forms non-stick surface
  • Dries quickly
  • Odourless
  • Does not discolour to yellow
  • Excellent water resistance
  • The painted surface can withstand frequent wet cleaning

Maximum permissible EU VOC content for this product (subcat. d): 130g/L; maximum VOC content in the product <130g/L.

  • Semi-matt in accordance with EN 13300

Wash resistance:
  • class 1 in accordance with EN 13300


For interior and exterior painting of wooden window frames, window sills and sashes, doors, door frames, window trimmers and other new or previously painted surfaces made of wood, wood chipboard, wood fibre board etc.
Not recommended for painting floors or thresholds.

Types of surfaces

Wooden surfaces, wood chipboard or woodfiber board.
Also suitable for primed metal surfaces indoors.

Quality standards

  • EN 13300 [Paints and varnishes. Water-borne coating materials and coating systems for interior walls and ceilings. Classification] – classification standards of coverage, gloss level and wet abrasion resistance parameters for water-borne coating materials for interior walls and ceilings.
  • VOC (volatile organic compounds) – content in accordance with the European Union directive 2004/42/CE
  • Product and service quality is guaranteed by the quality, environmental protection, occupational health and safety management system in accordance with standards ISO 9001:2015; ISO 14001:2015 and ISO 45001:2018
Machine tinting

Surface preparation before  treatment

The surface to be painted must be degreased and cleaned from peeling paint, dirt and dust; it must also be dry (moisture content must not exceed 20%). Clean the surface from dirt, sawdust or grease.  Scrub the places affected by mould with a brush or scraper and treat with the Biotol E (Biotol Spray) product. Remove peeling paint and rust stains (for example, those left by screw heads). Clean dirty surface with agent EasyClean. Hard glossy surfaces should be sanded until they are matt. Use the OPS PRO product for the removal of old varnish coatings if necessary. Impregnate the entire wooden surface to be painted with the product Biostop or Biostop Aqua V. If there are any knots on the surface, remove resin and treat the knots with isolating varnish.


Stir the paint thoroughly before application.  If necessary, dilute with water in the amount of 5% of its volume. Mixing a sufficient quantity of the tinted paint from several cans in one container is recommended for ensuring that the colour of large surfaces is even. Apply 1-2 coats with a brush or roller at the temperature between +10 °C and +22 °C and relative humidity not exceeding 80%. Application in the conditions of exposure to direct sunlight, draughts and high temperature can cause surface defects.

Care for the painted surface

The coating reaches its peak wash resistance in about 4 weeks; in the meantime, treat the surface with care until its hardness and wash resistance have reached their peak levels.
If necessary, the surface can be lightly wiped with a soft sponge or cloth approximately 48 hours after paint application.
We recommend using water and neutral or medium alkaline detergents (pH below 9) for cleaning.
Do not use organic solvents, abrasive cleansers and hard scrubbing brushes or sponges.  We recommend using Biotol E and Biotol Spray to remove mould.


Brush, roller.

Tool cleaning

Clean the tools with water after completing work.




Machine tinting according to the Eskarocolor system (base А)


6–10 m²/L 

Drying time

At the temperature of +20 °C and the relative humidity of 65%, the surface is ready for the application of another coat in 2…3 hours and is fully dry in 10 hours.  If the temperature is lower and the humidity is higher, the drying takes longer accordingly. The coating reaches its peak wash resistance in about 4 weeks.

Safety precautions

Warning! Hazardous respirable droplets may be formed when sprayed. Do not breathe spray or mist.
Contains 1,2-benzisothiazol-3(2H)-one, 2-methylisothiazol-3(2H)-one, 3-iodo-2-propynyl Butylcarbamate, reaction mass of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol-3-one (3:1). May produce an allergic reaction. May produce an allergic reaction. Keep out of reach of children. When operating, follow working safety standards and requirements. As a preventative measure it is recommended to use basic Personal Protection Equipment.

Waste treatment

Avoid release to the environment. Dispose of the contents/containers in accordance with the current legislation on waste treatment.
Waste treatment methods: code 08 01 12- Waste paint and varnish other than those mentioned in 08 01 11, waste class (Regulation (EU) No 1357/2014): non-dangerous.

Volume / weight

0,45 L - 0,9 L – 2,7 L 

Warranty period of storage

Frost resistance

Not frost-resistant


1,24 kg/L

Storage conditions

Store in a tightly closed container at the temperature between +5 °С and +30 °С. Protect from exposure to freezing and direct sunlight.
Send us a message

Related products