Akrit 7

High performance matt wall paint

Can be tinted into over 30,000 colours
Can withstand frequent wet cleaning

Download Technical Data Sheet

Description
Specifications
Information
Request SDS

Properties

Acrylate water-borne paint providing maximum application comfort.

Covers the surface well
High decorative properties
Stable gloss at different light angles, including side light
The surface can withstand frequent wet cleaning with detergents after drying
The paint does not give off harmful substances into the air and has been classified as emission class M1
Suitable for sensitive and allergic people

EU (2004/42/EC) VOC limit for this product (subcat. a): 30 g/l; maximum VOC content in the product ≤15 g/L.

Gloss:

matt (approximately 7) in accordance with EN 13300
group 5 in accordance with RYL 2011

Wash resistance:

class 1 in accordance with EN 13300 (ISO 11998)
group 314 of painting regulations in accordance with RYL 2012

Purpose

Painting ceilings and walls in rooms with normal or high humidity: residential and office rooms, children’s rooms, bedrooms, corridors, stair wells, clubs, industrial premises, etc.
Is not suitable for painting floors, doors and furniture.

Types of surfaces

New or previously painted surfaces made of concrete, aerated concrete, gypsum board, primed wood chipboard or wood fibre board; brick, surfaces filled with putty and plastered and surfaces covered with glass fibre wallpaper or other paintable finishing materials.

Quality standards

EN 13300 [Paints and varnishes. Water-borne coating materials and coating systems for interior walls and ceilings. Classification] – classification standards of coverage, gloss level and wet abrasion resistance parameters for water-borne coating materials for interior walls and ceilings.
ISO 11 998 [Paints and varnishes -- Determination of wet-scrub resistance and cleanability of coatings], ISO 2813 [Paints and varnishes -- Determination of specular gloss of non-metallic paint films at 20 degrees, 60 degrees and 85 degrees] – techniques for measuring gloss and wear resistance parameters.
RYL – construction quality standard for finishing commonly followed in the EU area; describes coating materials, using generally accepted standards, for proper quality assurance in construction.
VOC (volatile organic compounds) – content in accordance with the European Union directive 2004/42/CE.
Product and service quality is guaranteed by the quality,environmental, occupational health and safety management system in accordance with standards ISO 9001:2015; ISO 14001:2015 and ISO 45001:2018.
“Eesti Allergialiit tunnustab” (“Estonian Allergy and Asthma Federation recognizes”) is assigned to products that are safe, reliable, do not contain fragrance or generally irritating or sensitising substances and that help to reduce indoor air pollutant levels and are suitable for people with sensitive skin or suffering from allergic diseases.

Manual tinting

… Assortment of pastes

Machine tinting

Bases A pastel colours

…

Bases TR saturated colours

…

Surface preparation before treatment

The surface for painting must be carefully cleaned from peeling material, dirt and dust. If mould removal is necessary, use Biotol E or Biotol Spray. Sandpaper the surfaces previously coated with enamel or oil-bound paint until they are matt and remove the dust thoroughly. If the surface is very dirty, wash it with EasyClean.Fill cracks and dents with appropriate putty (Face Filler, Fine Filler, etc. Treat porous surfaces or surfaces that give up dust with Aquastop or Tiefgrund moisture barrier. Please follow the product application manual.

Application

Stir the paint thoroughly before application. The paint can be diluted with water in the amount of up to 5% of its volume for the application of the first coat. Apply 2 coats with a roller or spray gun at the temperature between 10 °C and 25 °C and relative humidity not exceeding 80%. In case the paint job is carried out in adverse conditions (draughts, the use of heating appliances, high temperature or low air humidity), we recommend using the Time+ slow-dry agent in the amount of up to 3% of the paint volume (mix 0.33 L of Time+ into 9.5 L of paint).

Care for the painted surface

The product achieves its final hardness and durability after one month under normal conditions, therefore the surfaces must be handled with care during this time. If necessary, the surface can be lightly wiped with a soft sponge or cloth approximately 48 hours after paint application. We recommend using water and neutral or medium alkaline detergents (pH below 9). Do not use solvents, abrasive cleansers and hard scrubbing brushes or sponges. Extensive rubbing may make the surface glossy. We recommend using Biotol E and Biotol Spray to remove mould.

Tools

Roller (pile length: 10-14 mm), airless spray gun (nozzle: 0.021–0.027'').

Tool cleaning

Wash with soap and water after completing work.

Colour	White
Tinting	Machine tinting according to the Eskarocolor system (bases А, TR).
Consumption	6-10 m²/L
Drying time	At the temperature of +20 °C and the relative humidity of 65%, the coat dries and the surface is ready for the application of another coat in 1–2 hours. If the temperature is lower and the humidity is higher, the drying takes longer accordingly.

Safety precautions

The product is not classified as dangerous according to CLP Regulation (EC) nº 1272/2008. Warning! Hazardous respirable droplets may be formed when sprayed. Do not breathe spray or mist. Contains 1,2-benzisothiazol-3(2H)-one. May produce an allergic reaction. Keep out of reach of children. Do not eat or drink during the process, washing hands afterwards with suitable cleaning products. In case of paint contact with eyes, wash the eyes with plenty of water. As a preventative measure it is recommended to use basic Personal Protection Equipment, with the corresponding <<CE marking>> in accordance with Directive 89/686/EC.

Waste treatment

Avoid release to the environment. Dispose of the contents/containers in accordance with the current legislation on waste treatment. Waste treatment methods: code 08 01 12- Waste paint and varnish other than those mentioned in 08 01 11, waste class (Regulation (EU) No 1357/2014): non-dangerous.

Volume / weight

0,95 L – 2,85 L – 4,75 L – 9,5 L – 19 L

Frost resistance	None
Density	1,3 kg/L.
Storage conditions	Store and transport in intact containers at the temperature between +5 °С and +30 °С. Protect from exposure to freezing and direct sunlight.

Send us a message

Name

Company

Country

Phone

SDS

Request language

Update text

Enter code