Universal enamel paint for wood and metal
Colour: White, ready-mix shades: anthracite, green, dark brown, light gray, black, carpenter’s white
Consumption: 7-10 m²/L (one coat)
Drying time: At a temperature of +23°C and a relative humidity of 50%, dry to the touch after 0.5-1 hour and application of the second layer in 6 hours.
Volume / weight: 0,9L – 2,7L – 9L
Silk mat water-based acrylic water-dispersion paint for wooden and metal surfaces for indoor and outdoor conditions.
Maximum permissible EU VOC content for this product (subcat. d): 130g/L; maximum VOC content in the product <130g/L.
Wash resistance:
Suitable for new and previously painted (with alkyd and oil paints) or varnished wood, fiberboard, chipboard, primed metal surfaces. Not recommended for previously industrially painted surfaces, as well as aluminum and unprimed galvanized surfaces. Not suitable for painting horizontal exterior surfaces and floors.
Garden furniture and constructions, details of wooden facades, fences, flower trellises, doors, window frames, furniture elements, toys, skirting boards, etc. As well as previously primed metal surfaces.
Clean surfaces from dust, grease, and loose peeling particles. Wash soiled surfaces with Easy Clean detergent and let them to dry. Darkened wood can be cleaned with WoodClean and, if necessary, treated with Biotol E (Biotol Spray) to remove mold or greenness from the surface. Rinse the cleaned surface with water and let it dry. Remove resin from knots. For outdoor use, prime wooden surfaces with deep impregnation agent Biostop or Biostop Aqua. Remove rust from metal surfaces and prime with Katto Primer. Follow the usage instructions for the mentioned products.
Before use, mix the paint thoroughly. Tinted paint is recommended to be mixed in one container. Apply 1–2 layers with a brush, roller, or spray at a temperature of +10…25°C and relative humidity below 80%. When applying the first layer or painting with a spray, the paint can be diluted with water up to 5% of the volume. Try to maintain a “wet edge” while painting.
The surface reaches its final wear resistance within 4 weeks. Until then, cleaning should be avoided. If absolutely necessary, the surface can be cleaned earlier using a soft sponge or cloth with lukewarm water, but not earlier than two days after painting. To wash the painted surface, use water and a neutral detergent. Do not use organic solvents, abrasive cleaning agents, or abrasive sponges or brushes. To remove mold, we recommend using Biotol E or Biotol Spray (refer to the product manual for instructions).
Roller, brush, paint gun
Clean the tools with water after completing work.
Avoid release to the environment. Dispose of the contents/containers in accordance with the current legislation on waste treatment. Waste treatment methods: code 08 01 12- Waste paint and varnish other than those mentioned in 08 01 11, waste class (Regulation (EU) No 1357/2014): non-dangerous.
Store in a tightly closed container at the temperature between +5 °С and +30 °С. Protect from exposure to freezing and direct sunlight.
The information concerning the product is based on the results of laboratory tests and practical use of the product depending on the location and conditions of its use. As the manufacturer, we guarantee the quality of the product and provide the best recommendations for its appropriate application. As the manufacturer, we cannot control the conditions and circumstances of product transportation, storage and application and numerous other factors that affect its use. Thus, we shall not bear responsibility for the damage caused by ignoring the instructions for use or transportation, by noncompliance with storage conditions and timeframes or by inappropriate application of the product. The manufacturer reserves the right to alter product information at their discretion without prior notice.
Consumption is calculated for 1 layer
