Colour: Black
Consumption: 8–12 m²/l per coat, actual consumption depends on the substrate and painting method.
Drying time:Ready for the application of another coat – 4 hours, dry for use – 1 week at +23 °C and 50% relative humidity. Lower temperatures and higher humidity will extend the drying time. The surface reaches its final wear resistance after 1 month.
Volume/weight: 0,45 L – 0,9 L
Black full-matte water-based paint for creating chalkboard surfaces in dry rooms.
Maximum permissible VOC content for the produc (subcat a): 30 g/L. Maximum VOC content in the product ˂30 g/L
Gloss:
•Deep matt in accordance with EN 13300
Wash resistance:
• Class 1 in accordance with EN 13300 (ISO 11998).
For creating chalkboard surfaces on walls and interior elements during indoor work. Applications: Residential and public spaces, cafés, bars, salons, meeting rooms, offices, lobbies, hotels, dressing rooms, children’s rooms, and more.
Newly prepared for painting Concrete, drywall, wood, laminated and other surfaces.
The painted surface must be cleaned from loose and peeling material, grease, dust and other impurities. Previously coated glossy surfaces should be sanded until matte and all sanding dust must be carefully removed. Heavily soiled surfaces should be cleaned with EasyClean and allowed to dry. If necessary, uneven areas should be filled with a suitable filler (e.g., from the FILLER series), allowed to dry, sanded smooth, and sanding dust removed. Unevenly absorbent or porous surfaces should be primed with a moisture barrier such as Aquastop or Tiefgrund. Drywall or filled surfaces should be primed with Flat or Estella primer. Non-absorbent surfaces (e.g., doors, furniture) should be primed with Luotto Tartuntapohja Aqua. Primer should be applied with a low-pile roller to achieve a smooth, pattern-free surface. Follow the instructions provided for the above-mentioned products.
Stir the paint thoroughly before use. Apply 2–3 coats with a low-pile roller at a temperature between +10 to +25 °C and relative humidity below 80%.
The surface should be handled with care for up to 7 days after painting, as it reaches its peak hardness during this time. Chalk marks can be removed from the painted surface using a damp sponge or cloth. After 4 weeks, the surface may be cleaned with neutral or mildly alkaline (pH up to 9) cleaning agents and soft sponges. Do not use abrasive cleaners or rough sponges or brushes. After cleaning, rinse the surface with clean water and dry thoroughly.
Warning! Hazardous respirable droplets may be formed when sprayed. Do not breathe spray or mist. Contains 1,2-benzisothiazol-3(2H)-one, 2-methylisothiazol-3(2H)-one, Reaction mass of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol-3-one (3:1). May produce an allergic reaction. If medical advice is needed, have product container or label at hand. Keep out of reach of children.
Avoid release to the environment. Dispose of the contents/containers in accordance with the current
legislation on waste treatment. Waste treatment methods: code 08 01 12- Waste paint and varnish other
than those mentioned in 08 01 11, waste class (Regulation (EU) No 1357/2014): non-dangerous
The information concerning the product is based on the results of laboratory tests and practical use of the product depending on the location and conditions of its use. As the manufacturer, we guarantee the quality of the product and provide the best recommendations for its appropriate application. As the manufacturer, we cannot control the conditions and circumstances of product transportation, storage and application and numerous other factors that affect its use. Thus, we shall not bear responsibility for the damage caused by ignoring the instructions for use or transportation, by noncompliance with storage conditions and timeframes or by inappropriate application of the product. The manufacturer reserves the right to alter product information at their discretion without prior notice
Consumption is calculated for 1 layer
