Cleaning agent for metal surfaces
Colour: Colorless, transparent
Consumption: 30-50 m²/L
Drying time: Dust-free – 2 hour, between coats – not less than 24 hours at +20º C and 80% relative humidity. At lower temperatures and higher humidity the drying time is prolonged.
Volume / weight: 3L
Water-dilutable alkaline cleaning agent for zinc and other metal surfaces.
For cleaning new or previously painted steel, aluminum, zinc and other metal surfacesbefore priming and painting. For external work.
Metal surfaces: roofs, cornices, gutters, window sills, ventilation pipes, fire ladders, flagpoles, etc.
The surface must be dry, free of rust and moss. To remove peeling paint and rust from previously painted surfaces, it is recommended to use power tools or clean manually with a steel brush and sandpaper.
Dilute the Katto Cleaner with 1 part detergent and 4 parts water and apply to the surface to be cleaned. Wash thoroughly with a brush while wearing protective gloves/protective clothing/safety glasses/protective mask and following work safety rules. Rinse treated surfaces thoroughly with warm water before the detergent dries. The temperature of the surface to be cleaned must not be below +10°С and above +50°С during the work. Allow the surface to dry before priming and painting.
Brush, wash brush
Wash tools thoroughly with soap and water
Danger. Harmful if swallowed. Causes severe skin burns and eye damage. Contains Ammonia < 5 %, aqueous solution; potassium hydroxide. Do not use in paint spraying equipment. If medical advice is needed, have product container or label at hand. Keep out of reach of children. Wash thoroughly after handling. Wear protective gloves/protective clothing/eye protection/face protection. IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower. IF INHALED: Remove person to fresh air and keep comfortable for breathing. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a poison center/doctor. UFI: ED10-A022-2000-EGWJ. Store locked up.
Avoid release to the environment. Dispose of the contents/containers in accordance with the current legislation on waste treatment. Liquid residues should be taken to a hazardous waste collection point (waste paint and varnish containing organic solvents or other dangerous substances08 01 11). Information about the collection points is provided by the local government or the Environmental Board.
Store at from +5° C to +30° C in the original sealed container. Protect from frost and direct sunlight.
The information concerning the product is based on the results of laboratory tests and practical use of the product depending on the location and conditions of its use. As the manufacturer, we guarantee the quality of the product and provide the best recommendations for its appropriate application. As the manufacturer, we cannot control the conditions and circumstances of product transportation, storage and application and numerous other factors that affect its use. Thus, we shall not bear responsibility for the damage caused by ignoring the instructions for use or transportation, by noncompliance with storage conditions and timeframes or by inappropriate application of the product. The manufacturer reserves the right to alter product information at their discretion without prior notice.
Kulu arvutatakse 1 kihile
