Deep matt interior paint
Colour: White
Consumption: 7…12 m²/L each coat.
Drying time: At the temperature of +20 °C and the relative humidity of 80%, the surface is ready for the application of another coat in 1–2,5 hours. The surface is fully dry in 4 hours.
Volume / weight: 9L – 18L
White, deep matt waterborne paint for ceilings and priming walls in dry rooms with normal use.
Maximum permissible VOC content for the product (subcat a): 30 g/L; maximum VOC content in the product: <15 g/L.
Gloss:
Wash resistance:
Indoor load class:
Painting ceilings in most residential and office spaces (children’s playrooms, rooms in childcare facilities, studies, libraries, living rooms, bedrooms, offices, stairwells, etc.) with normal humidity. Can be used as a primer for absorbent surfaces. Also suitable for painting walls in dry rooms with low requirements for washing and abrasion. Not suitable for painting floors, doors, and furniture.
Surfaces previously painted or new surfaces made of concrete, aerated concrete, gypsum board; brick; surfaces finished with filler or plastered and surfaces covered with glass fiber wallpaper or other rolled finishing materials. For interior use.
The surface to be painted must be carefully cleaned from loose or peeling material, dirt, grease and dust. If mould removal is necessary, use Biotol E or Biotol Spray Sandpaper durable alkyd substrates until they are matt and remove the dust thoroughly. If the surface is very dirty, wash it with EasyClean. Use a suitable filler to fill cracks, holes and uneven areas. Sand the filled surface to make it even and remove sanding dust. Prime filled surfaces with Tiefgrund moisture barrier to reduce porosity.
Stir the paint thoroughly before application. Mixing tinted paint in one container is recommended. Apply 2 coats with a roller or spray gun at the temperature between +10 °C and +25 °C and relative air humidity below 80%. When using a spray gun or for the application of the first coat, dilute the paint with water in the amount of 5% until it reaches working viscosity. Apply undiluted paint for the finishing coat. Avoid application in drafty places and at high air temperatures (over +25 °C). When painting, make sure to keep a wet edge. If you must work in unfavorable conditions (drafts, heating devices, high temperature, low humidity), we recommend adding the TIME+ drying time extender (up to 3% of the paint volume). When painting corners, filled with acrylic sealant, wait until it dries completely.
The coating reaches its peak wash resistance in 3-4 weeks; treat the surface with care until its hardness and wash resistance have reached their peak levels. We recommend using water and neutral or mildly alkaline detergents (pH below 9) for cleaning. Do not use organic solvents, abrasive detergents, or stiff brushes and rough sponges. Excessive rubbing may make the surface glossy. Use soft sponges and cloths for cleaning. Wipe the surface dry after wet cleaning.
Roller, airless spray gun (nozzle: 0.019–0.023”).
Wash with soap and water after completing work.
The product is not classified as hazardous according to CLP Regulation (EC) nº 1272/2008. Warning! Hazardous respirable droplets may be formed when sprayed. Do not breathe spray or mist. Contains 1,2- benzisothiazol-3(2H)-one, 2-methylisothiazol-3(2H)-one, reaction mass of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol-3-one (3:1). May produce an allergic reaction. Keep out of reach of children.
When operating, follow working safety standards and requirements. When spraying wear clothes, goggles, respirator, and work in a well-ventilated room. Wash contaminated surfaces and used items using water. As a preventative measure, it is recommended to use basic Personal Protection Equipment.
Avoid release to the environment. Dispose of the contents/containers in accordance with the current legislation on waste treatment. Waste treatment methods: code 08 01 12- Waste paint and varnish other than those mentioned in 08 01 11, waste class (Regulation (EU) No 1357/2014): non-dangerous.
Store in a tightly sealed container at a temperature between +5…30 °С. Protect from exposure to freezing and direct sunlight.
The information concerning the product is based on the results of laboratory tests and practical use of the product depending on the location and conditions of its use. As the manufacturer, we guarantee the quality of the product and provide the best recommendations for its appropriate application. As the manufacturer, we cannot control the conditions and circumstances of product transportation, storage and application and numerous other factors that affect its use. Thus, we shall not bear responsibility for the damage caused by ignoring the instructions for use or transportation, by noncompliance with storage conditions and timeframes or by inappropriate application of the product. The manufacturer reserves the right to alter product information at their discretion without prior notice.
Kulu arvutatakse 1 kihile
