Cinderella

Highly dirt-repellent matt wall paint

  • „Easy to clean“ – easy to clean from difficult  dirt
  • Provided with self-crosslinking dispersion
  • Contains special solid fillers based on natural aluminosilicate
  • Highest grade of wash resistance (Class I)
 

Colour: White

Consumption: Paint consumption on absorbent substrates is 7–8 m²/L, on non-absorbent substrates 9–10 m²/L.

Drying time: At the temperature of +20 °C and the relative humidity of 80%, the surface is ready for the application of another coat in 1…1,5 hours.

Volume / weight: 0,9L – 2,7L – 9L

Properties

Matt acrylate water-borne paint for wet and dry indoor areas

  • Excellent opacity
  • Easy applications without dripping or splatter; easy to level out
  • The paint does not give off harmful substances into the air and has been classified as emission class M1
  • Exceptional decorative properties: provides a smooth dense matt non-porous coating
  • Due to the self-crosslinking dispersion, the formed surface is stronger and less porous that prevents the penetration of complicated dirt (coffee, tea, fruit juices, wine, sauces, markers, watercolor paints, pencils, pens, lipstick, etc.)
  • The exceptional mechanical strength of the coating is ensured by the use of a special natural aluminosilicate solid component
  • Highest grade of wash resistance (Class I according to EN13300)
  • Remove stains and dirt immediately after they appear
  • Can withstand moderate rubbing without becoming glossy

Maximum permissible EU VOC content for the product: (subcat a): 30 g/L. Maximum VOC content in the product <10 g/L.

Gloss:

  • Matt (approximately 7) in accordance with EN 13300
  • Group 5 according to RYL 2012

 

Wash resistance:

  • Class 1 in accordance with EN 13300
  • 315 group of painting products according to RYL 2012

    Indoor load class:

  • RL 05 Special loads and requirements in humid interior spaces according to RYL 2012

     

Purpose

Painting walls in humid and wet indoor areas. Especially recommended for nurseries, school classrooms, hotels, kitchens and catering facilities. Do not use the coated surface for drawing! Not suitable for painting floors, doors or furniture.

Types of surfaces for painting

Surfaces previously painted with latex, alkyd or oil-based paints or new surfaces made of concrete, aerated concrete, gypsum board or brick, surfaces finished with putty. For interior use.

Surface preparation before painting

The surface to be painted must be carefully cleaned from loose or peeling material, dirt, grease and dust. Sandpaper durable alkyd substrates until they are matt and remove the dust thoroughly. If the surface is very dirty, wash it with EasyClean. Use a putty from the FILLER line to fill cracks, holes and uneven areas. Sand the filled surface to make it even and remove sanding dust. Prime filled surfaces with Aquastop or Tiefgrund, in wet rooms with Aquastop Bio moisture barrier to reduce porosity. Follow the product instructions for use.

Application

Stir the paint thoroughly before application. Mixing tinted paint in one container is recommended. Apply 2 coats with a roller or spray gun  at the temperature between +10 °C and +25 °C and relative air humidity below 80%. When using a spray gun or for the application of the first coat, dilute the paint with water in the amount of 5% until it reaches working viscosity. Apply undiluted paint for the finishing coat. Avoid application in drafty places and at high air temperature (over +25 °C). When painting, make sure to keep a wet edge.

Care for the painted surface

Under normal circumstances, the coating reaches its initial level of water-repellent (hydrophobic) protection within 1–2 weeks after application, so we do not recommend cleaning the painted surface during this period. In case the painted surface needs to be cleaned earlier, do it cautiously with a soft damp cloth. Remove stains and dirt immediately after they appear.
Under normal circumstances, the coating reaches its peak wash resistance in 3-4 weeks, after which it can also withstand more vigorous cleaning.  To clean the painted surface from dirt, use warm water and a soft washcloth or microfiber cloth.  Do not use abrasive tools or detergents, stiff brushes or rough sponges.
As a rule, the painted surface regains its water-repellent properties in 5–7 days after it is cleaned with a damp cloth, but the timeframe still depends on the detergent or tool used, on how vigorous the cleaning process is and how dirty the surface is. The use of a detergent may prevent the surface from regaining its hydrophobic properties. However, the absence of the paint’s water-repellent properties will not reduce its resistance to washing.

Tools

Roller, airless spray gun

Tool cleaning

Wash with soap and water after completing work

Storage conditions

Store and transport in a tightly sealed container at the temperature between +5…30 °С. Protect from exposure to freezing and direct sunlight.

 


 

The information concerning the product is based on the results of laboratory tests and practical use of the product depending on the location and conditions of its use. As the manufacturer, we guarantee the quality of the product and provide the best recommendations for its appropriate application. As the manufacturer, we cannot control the conditions and circumstances of product transportation, storage and application and numerous other factors that affect its use. Thus, we shall not bear responsibility for the damage caused by ignoring the instructions for use or transportation, by noncompliance with storage conditions and timeframes or by inappropriate application of the product. The manufacturer reserves the right to alter product information at their discretion without prior notice.

Kulu arvutatakse 1 kihile