Preservative for wooden surfaces
Colour: Colourless
Consumption: One coat: 4–6 m2/l for sawn wood; 8–10 m2/l for planed wood; dipping: 30–60 l/m³, treatment duration: 1 hour.
Drying time: 6–10 hours at 20 °C and the relative humidity of 50%.
Volume / weight: 0,9L – 2,7L – 9L
Deeply penetrating alkyd primer for long-term wood protection.
Maximum permissible EU VOC content for the product (subcat. h): 750 g/L. Maximum VOC content in the product <750 g/L.
Use conditions for the wood:
Meant for priming wooden surfaces and façades, including those in environments with high humidity, drastic temperature changes, permanently exposed to sunlight; façade elements located next to drains (eaves); damaged areas identified in the course of repairs; for priming terraces, floorings, walkways, handrails, stairs, cribwork, log structures, window frames, doors, gates, fences and garden furniture. Can be used in wet or regularly wetted locations for priming construction and framework wood, walls, baseboards, ceilings, partitions, window frames, doors, window sills, furniture, floors, stairs, handrails, etc. as well as wooden items and structures kept in sheds or in unheated rooms.
Do not use for wood contacting soil, ground water or the marine environment.
Do not use as the final coating; a finishing coat for wooden surfaces must be applied on top.
Not recommended for indoor use in dry rooms.
Wooden surfaces, chipboard, plywood and veneer: new untreated or after the removal of earlier coating. Suitable for sawn or planed wood. Do not use for treating wood contaminated by microorganisms or infested by pest insects.
Wood moisture content must not exceed 20%. Perform application at the temperature above 5 °C and relative humidity up to 80%. Clean the surface thoroughly from dirt, grease and dust. The wood must not be damaged by algal growth. Use the WoodClean wood cleaning agent or Biotol E anti-mould agent to pre-treat the surfaces damaged with blue stain or mould. Clean previously painted surfaces completely, using a scraper, a stiff brush, a heat gun or a paint or varnish remover OPS Pro. Remove the darkened areas of the wood mechanically, using a stiff brush, and replace dead wood. Use galvanised fasteners for fastening treated wooden parts. Pre-treat untreated metal parts (nail-heads or braces) with anticorrosive primer. Finish treating outdoor surfaces so that the surface can dry before the evening dew falls. We do not recommend performing the application in direct sunlight or at high temperatures. Please pay attention to the constructional methods of protecting wooden surfaces: good waterproofing of walls and the roof, water drainage and ventilation. The result of using wood protection products depends on the adequate use of constructional methods of the protection of wooden surfaces.
Stir the product thoroughly before application. Do not dilute! Apply 2 coats at the temperature above +5 °C and relative humidity below 80%. Saturate board and log ends with the product thoroughly. Remove the primer that has not been absorbed with a cloth, preventing a “fatty” film from forming on the surface, which can weaken the adhesion of the top coating. The treated surface can be painted over with water-borne paints in 3–5 days at the earliest or coated with decorative products for wooden surfaces, alkyd-based or oil-based paints in 12 hours at the earliest. Do not use as the final coating; a finishing coat for wooden surfaces must be applied on top.
Brush, dipping.
Clean the tools with White-Spirit after completing work.
Danger. Harmful if inhaled. Harmful to aquatic life with long lasting effects. May be fatal if swallowed and enters airways. Repeated exposure may cause skin dryness or cracking. Contains 3-iodo-2-propynyl Butylcarbamate. May produce an allergic reaction. Hydrocarbons, C10-C13, n-alkanes, isoalkanes, cyclics, <2% aromatics. If medical advice is needed, have product container or label at hand. Avoid breathing dust/fume/gas/mist/vapours/spray. Use only outdoors or in a well-ventilated area. IF SWALLO-WED: Immediately call a POISON CENTER/doctor. F INHALED: Remove person to fresh air and keep comfortable for breathing. UFI: ED10-A022-2000-EGWJ. Keep out of reach of children. As a preventative measure it is recommended to use basic Personal Protection Equipment, with the corresponding <<CE marking>> in accordance with regulation (EU) 2016/425
Avoid release to the environment. Dispose of the contents/containers in accordance with the current legislation on waste treatment. Waste treatment methods: code 08 01 11*- Waste paint and varnish containing organic solvents or other dangerous substances; waste class: dangerous Regulation (EU) No 1357/2014.Store in a tight container at the temperature below 30 °C. Protect from direct sunlight.
Store in a tight container at the temperature below 30 °C. Protect from direct sunlight.
The information concerning the product is based on the results of laboratory tests and practical use of the product depending on the location and conditions of its use. As the manufacturer, we guarantee the quality of the product and provide the best recommendations for its appropriate application. As the manufacturer, we cannot control the conditions and circumstances of product transportation, storage and application and numerous other factors that affect its use. Thus, we shall not bear responsibility for the damage caused by ignoring the instructions for use or transportation, by noncompliance with storage conditions and timeframes or by inappropriate application of the product. The manufacturer reserves the right to alter product information at their discretion without prior notice.
Kulu arvutatakse 1 kihile
