Colour: Colourless. Ready-made colours: teak, mahogany, hazelnut, rosewood.
Consumption:Per one coat: 5 –9 m2/L for sawn wood; 10 –12 m2/L for planed wood.
Drying time:12 – 24 hours at the temperature of 23°C and the relative air humidity of 50%. The porosity of the surface and thickness of the coat influence the drying time.
Volume/weight: 0.9 L – 2.7 L – 9 L
Classic product for the protection and decorative finishing of wooden surfaces
Maximum permissible EU VOC content for the product (subcat f): 700 g/L. Maximum VOC content in the product <700 g/L.
Recommended for the wooden facades that are not in contact with the ground, surface, or seawater. Suitable for the decorative treatment of wooden structures (walls, fences, gates, gardens, windows, doors, etc.). Colorless Balance is intended for use in a tinted form! Colored Balance can be used as the first layer to give a tone to wooden surfaces (stairs, handrails, etc.), but it is essential to apply a wear-resistant varnish over it. For outdoor use.
New untreated or old coating-free wooden surfaces, structures, chipboard and fiberboard, plywood, veneer, log and other wood products, including pressure-treated wood. Suitable for both sawn and planed surfaces. Can be used on all types of wood, including dense varieties. Not to be used on biologically damaged surfaces.
The wooden surface to be treated must be dry, with a moisture content not exceeding 20%. The appropriate working temperature is above +5°C, and the permissible relative humidity is up to 80%. The surface must be carefully cleaned of dirt, grease, and dust. Use WoodClean for cleaning and bleaching the wood. After cleaning, rinse the surface thoroughly with clean water and allow it to dry. Previously painted surfaces should be thoroughly cleaned of old paint using a scraper, brush, heat gun, or paint remover (OPS Pro). Rotten and decayed boards must be replaced with new ones. It is recommended to use galvanized fasteners for securing wooden elements. New or fully cleaned surfaces should be primed with deep penetration impregnation (Biostop). Work should not be carried out in hot weather, direct sunlight, strong winds, rain, or fog. Ensure that the treated surface has time to dry before evening dew forms. Pay attention to structural wood protection methods, such as good drainage, ventilation, and waterproofing of the foundation, walls, and roof. The effectiveness of wood protection products depends on the proper implementation of these structural wood protection methods. Follow the instructions for the products listed above.
Mix thoroughly before use. To ensure a uniform color tone, choose products from the same batch or mix different batches together before applying. Apply 2 coats to the surface with a brush. Apply evenly with a brush from edge to edge along the wood grain, covering one to three board widths. Pay special attention to finishing the edges and end surfaces. For previously coated surfaces, it is recommended to use the same or a similar shade of wood treatment. The final color of the treated surface depends on the wood type, the number of applied layers, and the presence of knots. Colorless Balance is intended for use in a tinted form and is not suitable for outdoor work when used as a clear coating. When treating large surfaces, it is advisable to mix all products together in one container to maintain a consistent color tone. Follow the instructions provided for the listed products.
Under normal conditions, the treated surface reaches peak wash-resistance in one week. Use water or a neutral detergent (рН 6–8) for cleaning.
Brush
Wash with White-Spirit or Männitärpentin after completing work.
Danger. Harmful to aquatic life with long lasting effects. May be fatal if swallowed and enters airways. Causes serious eye irritation. Repeated exposure may cause skin dryness or cracking. Contains 4,5-dichloro-2-octyl-2H-isothiazol-3-one, Octabenzone. May cause an allergic reaction. Contains Hydrocarbons, C10-C13, n-alkanes, isoalkanes, cyclics, <2% aromatics. Wear protective gloves, face protection, protective clothing, protective footwear. Wash carefully after handling. IF SWALLOWED: Contact a POISON CENTER or doctor immediately.If medical advice is needed, have product container or label at hand. UFI: FP20-W0E0-N00E-AMNH. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Keep out of reach of children.
The information concerning the product is based on the results of laboratory tests and practical use of the product depending on the location and conditions of its use. As the manufacturer, we guarantee the quality of the product and provide the best recommendations for its appropriate application. As the manufacturer, we cannot control the conditions and circumstances of product transportation, storage and application and numerous other factors that affect its use. Thus, we shall not bear responsibility for the damage caused by ignoring the instructions for use or transportation, by noncompliance with storage conditions and timeframes or by inappropriate application of the product. The manufacturer reserves the right to alter product information at their discretion without prior notice.
Consumption is calculated for 1 layer
