High performance matt wall paint
Colour: White
Consumption: 6-10 м²/L.
Drying time: At the temperature of +20 °C and the relative humidity of 65%, the coat dries and the surface is ready for the application of another coat in 1–2 hours. If the temperature is lower and the humidity is higher, the drying takes longer accordingly.
Volume / weight: 0,95 L – 2,85 L – 4,75 L – 9,5 L – 19 L
Acrylate water-borne paint providing maximum application comfort.
EU (2004/42/EC) VOC limit for this product (subcat. a): 30 g/l; maximum VOC content in the product ≤15 g/L.
Gloss:
Wash resistance:
Painting ceilings and walls in rooms with normal or high humidity: residential and office rooms, children’s rooms, bedrooms, corridors, stair wells, clubs, industrial premises, etc.
Is not suitable for painting floors, doors and furniture.
New or previously painted surfaces made of concrete, aerated concrete, gypsum board, primed wood chipboard or wood fibre board; brick, surfaces filled with putty and plastered and surfaces covered with glass fibre wallpaper or other paintable finishing materials.
The surface for painting must be carefully cleaned from peeling material, dirt and dust. If mould removal is necessary, use Biotol E or Biotol Spray. Sandpaper the surfaces previously coated with enamel or oil-bound paint until they are matt and remove the dust thoroughly. If the surface is very dirty, wash it with EasyClean.Fill cracks and dents with appropriate putty (Face Filler, Fine Filler, etc. Treat porous surfaces or surfaces that give up dust with Aquastop or Tiefgrund moisture barrier. Please follow the product application manual.
Stir the paint thoroughly before application. The paint can be diluted with water in the amount of up to 5% of its volume for the application of the first coat. Apply 2 coats with a roller or spray gun at the temperature between 10 °C and 25 °C and relative humidity not exceeding 80%. In case the paint job is carried out in adverse conditions (draughts, the use of heating appliances, high temperature or low air humidity), we recommend using the Time+ slow-dry agent in the amount of up to 3% of the paint volume (mix 0.33 L of Time+ into 9.5 L of paint).
The product achieves its final hardness and durability after one month under normal conditions, therefore the surfaces must be handled with care during this time. If necessary, the surface can be lightly wiped with a soft sponge or cloth approximately 48 hours after paint application. We recommend using water and neutral or medium alkaline detergents (pH below 9). Do not use solvents, abrasive cleansers and hard scrubbing brushes or sponges. Extensive rubbing may make the surface glossy. We recommend using Biotol E and Biotol Spray to remove mould.
Roller (pile length: 10-14 mm), airless spray gun (nozzle: 0.021–0.027”).
Wash with soap and water after completing work.
The product is not classified as dangerous according to CLP Regulation (EC) nº 1272/2008. Warning! Hazardous respirable droplets may be formed when sprayed. Do not breathe spray or mist. Contains 1,2-benzisothiazol-3(2H)-one. May produce an allergic reaction. Keep out of reach of children. Do not eat or drink during the process, washing hands afterwards with suitable cleaning products. In case of paint contact with eyes, wash the eyes with plenty of water. As a preventative measure it is recommended to use basic Personal Protection Equipment, with the corresponding <<CE marking>> in accordance with Directive 89/686/EC.
Avoid release to the environment. Dispose of the contents/containers in accordance with the current legislation on waste treatment. Waste treatment methods: code 08 01 12- Waste paint and varnish other than those mentioned in 08 01 11, waste class (Regulation (EU) No 1357/2014): non-dangerous.
Store and transport in intact containers at the temperature between +5 °С and +30 °С. Protect from exposure to freezing and direct sunlight.
Kulu arvutatakse 1 kihile
