Water-borne acrylate varnish for furniture
Colour: White, transparent after drying
Consumption: 8-10 m2/L
Drying time: Dust-free drying time: 0.5 hour; at the temperature of +20 °C and the relative humidity of 65%, the surface is ready for the application of another coat in 2…3 hours. If the temperature is lower and the humidity is higher, the drying takes longer accordingly. The varnish coating reaches its peak hardness and durability in about three weeks. In the meantime, avoid loading the surface, vigorous cleaning or contact of the surface with hot or sticky objects. At lower temperature and higher humidity drying will take longer.
Volume / weight: 0,45L – 0,9L
Water-borne acrylate varnish for furniture and other indoor wooden surfaces.
Maximum permissible EU VOC content for the product (subcat e): 130 g/L. Maximum VOC content in the product ˂130 g/L
Gloss:
To be used for furniture (tables, chairs, shelves, etc.) and other wooden surfaces (panel walls, wooden ceilings, doors, window frames, baseboards, plywood and wood veneer products, etc.) and for the protection of painted or stained surfaces.
Do not use for treating floors or steam rooms.
Wooden surfaces.
The surface must be clean and dry. Wood moisture content must not exceed 12%.
Previously untreated surfaces. Clean the surface from dirt, dust or grease. Before application, spray wooden surfaces with water, let them dry and sand the wood fibers which have risen.
Previously varnished surfaces. Sand thoroughly until the surface is matte. Fully remove peeling old coating. Use the OPS Pro product for the removal of old varnish coatings if necessary. Then prepare he surface in the same way as untreated surfaces.
Stir the varnish thoroughly before application and keep stirring it regularly during the working process to spread tinting pastes and the matt agent evenly.
If necessary, the varnish can be diluted with water in the amount of 20% of its volume for the first coat. Application in the conditions of exposure to direct sunlight, draughts and high temperature can cause surface defects.
We recommend applying 2–3 coats of varnish along the grain without stopping from one edge of the surface to the other at the temperature between +10°C and +27°C and at relative humidity not over 80%.
Sand the surface slightly and remove dust before applying another coat.
The colour of the surface coated with tinted varnish depends on the species and hue of the wood and the number of varnish coats. Before applying tinted varnish, we recommend making a swatch on a separate board to check the tint.
The coating reaches its peak hardness in about 3 weeks; in the meantime, treat the surface with care until its hardness and wash resistance have reached their peak levels.
If necessary, the surface can be lightly wiped with a soft sponge or cloth approximately 48 hours after varnish application.
We recommend using water and neutral or medium alkaline detergents (pH below 9) for cleaning.
Do not use organic solvents, abrasive cleansers and hard scrubbing brushes or sponges.
The coating is resistant to solutions of detergents in water, to oils and greases, and exposure to weak solvents (gasoline, white spirit). Make sure to remove stains from coffee, tea, fruit juices and other colouring liquids immediately!
Varnish brush, varnish roller.
Wash with soap and water after completing work.
The product is not classified as dangerous according to CLP Regulation (EC) nº 1272/2008. Contains 1,2-benzisothiazol-3(2H)-one, 2-methylisothiazol-3(2H)-one, reaction mass of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol-3-one. May produce an allergic reaction. If medical advice is needed, have product container or label at hand. Keep out of reach of children. Do not eat or drink during the process, washing hands afterwards with suitable cleaning products. As a preventative measure it is recommended to use basic Personal Protection Equipment, with the corresponding <<CE marking>> in accordance with Directive 89/686/EC.
Dispose of the contents/containers in accordance with the current legislation on waste treatment. Waste treatment methods: code 08 01 12- Waste paint and varnish other than those mentioned in 08 01 11, waste class (Regulation (EU) No 1357/2014): non-dangerous.
Store and transport in undamaged containers at the temperature between +5…+35 °C. Protect from freezing and direct sunlight.
The information concerning the product is based on the results of laboratory tests and practical use of the product depending on the location and conditions of its use. As the manufacturer, we guarantee the quality of the product and provide the best recommendations for its appropriate application. As the manufacturer, we cannot control the conditions and circumstances of product transportation, storage and application and numerous other factors that affect its use. Thus, we shall not bear responsibility for the damage caused by ignoring the instructions for use or transportation, by noncompliance with storage conditions and timeframes or by inappropriate application of the product. The manufacturer reserves the right to alter product information at their discretion without prior notice.
Kulu arvutatakse 1 kihile
