Fully matt washable interior paint
Colour: White; ready made color: black
Consumption: 6-10 m2/L.
Drying time: At the temperature of +20 °C and the relative humidity <80%, the surface is dust dry after 30 minutes and ready for the application of another coat in 2 hours. The coating reaches its peak wash resistance in 4 weeks
Volume / weight: 0,95L – 2,85L – 9,5L
Water-borne absolutely matt paint for painting walls and ceilings indoors.
Maximum permissible VOC content for the produc (subcat a): 30 g/L. Maximum VOC content in the product ˂30 g/L
Gloss:
Wash resistance:
For painting walls and ceilings in dry and demanding rooms, where a strong, fully matte washable surface is required. Places of use: living and social spaces, salons, conference halls, meeting rooms, offices, lobbies, hotels, boudoirs, etc. Not suitable for painting floors, doors and furniture.
Previously painted or newly prepared for painting concrete, plaster, plasterboard, building block, fiberboard and chipboard surface, paintable wallpaper, etc. For indoor use.
Previously unpainted surfaces: Clean the surface, removing dirt and dust. Apply a suitable putty from the FILLER line to even out the surface if necessary. After drying, sand the filled surface to make it even and remove sanding dust. Prime filled, porous or unevenly porous surfaces with Aquastop moisture barrier. Follow the product instructions for use. Prime the surfaces with water-borne priming paint Flat to even out the surface absorption capacity, increase the durability of the painted surface and decrease the consumption of the top coat paint.
Previously painted surfaces: The painted surface must be cleaned from loose and peeling material, grease, dust and other impurities. If mould removal is necessary, use Biotol E or Biotol Spray (follow the product instructions for use). To clean the surfaces that are very dirty or have soot, water, nicotine or grease stains, wash the surface with a EasyClean. Then prime with the isolating paint Objekt. Before painting durable old alkyd surfaces, sand them until they are matt and remove sanding dust thoroughly. Use a putty from the FILLER line to fill cracks, holes and uneven areas. Sand the filled surface to make it even and remove sanding dust. Prime filled surfaces with Aquastop or Tiefgrund moisture barrier to reduce porosity. Prime the surfaces with water-borne priming paint Flat to decrease the consumption of the top coat paint and improve coverage.
Stir the paint thoroughly before application. We recommend mixing tinted paint in one package.
Apply 2 coats with a roller or spray gun at the temperature between 10 °C and 20 °C and relative humidity not exceeding 80%. When using a spray gun, you can dilute the paint with water in the amount of up to 6% of its volume. Apply the finishing coat, using undiluted paint. Avoid application in draughty places and at high air temperature (over +25 °C). When painting, make sure to keep a wet edge. In case the paint job is carried out in adverse conditions (draughts, the use of heating appliances, high temperature or low air humidity), we recommend using the Time+ slow-dry agent in the amount of up to 3% of the paint volume (mix 0.33 L of Time+ into 9.5 L of paint).
In the 4 weeks after application until the paint has reached its peak hardness and wash resistance, threat the surface with care.
We recommend using water and neutral or medium alkaline detergents (pH below 9) for cleaning.
Do not use organic solvents, abrasive cleansers and hard scrubbing brushes or sponges.
Use Biotol E and Biotol Spray to remove mould.
Use soft sponges or cloths for cleaning. Wipe the surface dry after wet cleaning.
If necessary, the surface can be lightly wiped with a soft sponge or cloth approximately 48 hours after paint application.
Roller, airless spray gun, brush.
Wash with soap and water after completing work.
Store and transport in intact containers at the temperature between +5…30°С. Protect from exposure to freezing and direct sunlight.
The information concerning the product is based on the results of laboratory tests and practical use of the product depending on the location and conditions of its use. As the manufacturer, we guarantee the quality of the product and provide the best recommendations for its appropriate application. As the manufacturer, we cannot control the conditions and circumstances of product transportation, storage and application and numerous other factors that affect its use. Thus, we shall not bear responsibility for the damage caused by ignoring the instructions for use or transportation, by noncompliance with storage conditions and timeframes or by inappropriate application of the product. The manufacturer reserves the right to alter product information at their discretion without prior notice.
Kulu arvutatakse 1 kihile
