Water-repellent treatment for stone surfaces
Colour: Transparent. The initial look of the treated surfaces is restored when the product has dried. NB! Some surfaces might display slight colour changes after the treatment, so apply a test coat on a small area of the surface first
Consumption: 2…5 m²/L. Consumption depends on the porosity of the surface. Perform a test coating to determine the exact consumption.
Drying time: 1…6 hours at the temperature of 20 °C and the relative humidity of 65%. At lower temperatures and higher humidity, the drying time increases. Treated materials reach the peak of water-repellent properties in 3–5 days.
Volume / weight: 0,5L – 1L – 3L
Siloxane-based treatment for long-term protection of mineral surfaces against the elements.
Maximum permissible VOC content for the product (subcat h): 750 g/L; maximum VOC content in the product: ˂750 g/L.
Increasing water-repellent properties of mineral surfaces; outdoor use. Façades, pavements, curb stones, stairs, sculptures, monuments, memorial stones and other decorative pieces. Not suitable for fresh plastered or concrete surfaces and the surfaces that are constantly exposed to water.
Porous mineral surfaces: concrete, aerated concrete, calcium-silicate bricks, clinker brick and fired brick, Eternit, plastered surfaces, natural an artificial stone, structural and decorative stone, including uncut granite and marble, dolomite, limestone, etc.
The surface to be treated must be dry and cleaned from dirt, dust, grease, salt residue, moss, and loose or peeling material. To clean the surfaces that are very dirty or have soot, water, nicotine or grease stains use EasyClean (or wash with a 3–5% solution of soda, rinsed with water and left to dry). Pressure washing is recommended to completely remove old coating materials and persistent dirt. Mould and moss damage must be thoroughly cleaned, and the surface under it must be treated with BIOTOL Е or BIOTOL SPRAY, washed with water and left to dry. Clean reinforcement bars and other metal components from rust and immediately prime with anti-corrosion paint. Then apply the filler matching the surface, even it out and let it dry. Allow surfaces wet from rain dry for at least 2 days before applying the treatment. Before treatment, cover any areas that do not need to be treated (windows, doors, parts made of metal, wood and other materials).
Apply 1–2 coats with a soft brush, roller or spray gun. Apply the second coat 0.5–1 hour after the first one. Apply the primer on highly porous surfaces at least 3 time. Make sure to apply the product evenly from bottom to top on vertical surfaces to prevent streaking. The surface and air temperature during application must be at least +5° С, and the relative air humidity must not exceed 80%. Do not apply in the rain!
Brush, roller, spray.
White Spirit, nitro solvent.
DANGER. May be fatal if swallowed and enters airways. Contains hydrocarbons, C10-C13, n-alkanes, isoalkanes, cyclics, <2% aromatics. Repeated exposure may cause skin dryness or cracking. IF SWALLOWED: Immediately call a POISON CENTER/doctor. If medical advice is needed, have product container or label at hand. UFI: HC00-70S9-D002-GDWS. Do NOT induce vomiting. Keep out of reach of children. Store locked up. As a preventative measure it is recommended to use basic Personal Protection Equipment, with the corresponding <<CE marking>> in accordance with Directive 89/686/EC. In the case of combustion as a result of improper handling, storage or use preferably use polyvalent powder extinguishers (ABC powder). IT IS NOT RECOMMENDED to use full jet water as an extinguishing agent.
Avoid release to the environment. Dispose of the contents/containers in accordance with the current legislation on waste treatment. Waste treatment methods: code 08 01 11*- Waste paint and varnish containing organic solvents or other dangerous substances; waste class: dangerous Regulation (EU) No 1357/2014.
Store in a tightly sealed container at the temperature between +5…30 °С. Protect from direct sunlight.
The information concerning the product is based on the results of laboratory tests and practical use of the product depending on the location and conditions of its use. As the manufacturer, we guarantee the quality of the product and provide the best recommendations for its appropriate application. As the manufacturer, we cannot control the conditions and circumstances of product transportation, storage and application and numerous other factors that affect its use. Thus, we shall not bear responsibility for the damage caused by ignoring the instructions for use or transportation, by noncompliance with storage conditions and timeframes or by inappropriate application of the product. The manufacturer reserves the right to alter product information at their discretion without prior notice.
Kulu arvutatakse 1 kihile
