Anticorrosion Primer
Colour: Light gray
Consumption: 7-10 m²/L with 1 layer applied (dried layer thickness is approx. 40–60 µm). 100 The thickness of the wet paint layer, µm – 40 Thickness of dry paint layer, µm – 9 Consumption, m2/L 2/L; 150 The thickness of the wet paint layer, µm – 60 Thickness of dry paint layer, µm – 7 Consumption, m2/L.
Drying time: Dust-free – 2 hour, between coats – 8-24 hours at +20º C and 80% relative humidity. At lower temperatures and higher humidity the drying time is prolonged.
Volume / weight: 0,9L – 2,7L – 9L
Water-based primer for zinc and other metal surfaces
Maximum permissible EU VOC content for the product (subcat. h): 140 g/L. Maximum VOC content in the product <140 g/L
Gloss level:
Priming new or previously painted steel, aluminum, zinc and other metal surfaces. For external work
Metal surfaces: roofs, cornices, gutters, window sills, ventilation pipes, fire ladders, flagpoles, etc.
The surface to be primed must be dry, free of rust, moss, oils and other dirt. To remove peeling paint and rust from previously painted surfaces, sandblastingor manual cleaning with a steel brush or sandpaper is recommended. OPS Pro can be used to remove old paint. Be sure to wash the cleaned surface with Katto Cleaner before priming, then rinse with water and allow to dry.
Mix well before use. Apply 1 coat of paint with a brush or a spray. When spraying, add 5-10% of water to paint. The temperature of the surface to be painted must not be below +10° С and above +40° С. The relative humidity must be below 80%. The painting work should be timed so that the treated surface can dry before the evening dew appears. It is not advisable to work in hot weather, direct sunlight, too cold weather, rain, fog. Please follow the instructions for use of the above products.
Brush, spray.
Wash tools thoroughly with soap and water.
Harmful to aquatic life with long lasting effects. Warning! Hazardous respirable droplets may be formed when sprayed. Do not breathe spray or mist. Contains 1,2-benzisothiazol-3(2H)-one, Reaction mass of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol-3-one (3:1). May produce an allergic reaction. If medical advice is needed, have product container or label at hand. Keep out of reach of children. Avoid release to the environment..
Avoid or minimize residues. Do not empty into drains. Avoid release to the environment. Collect spillage. Dispose of the contents/containers in accordance with the current legislation on waste treatment. Liquid residues should be taken to a hazardous waste collection point (waste paint and varnish containing organic solvents or other dangerous substances 08 01 11). Information about the collection points is provided by the local government or the Environmental Board. Dried residues may be disposed of in the municipal waste container. Dispose of empty, dry packaging for recycling at the packaging collection point (Waste Management Code 15 01). Returnable containers must be properly cleaned before being recycled.
Store at from +5° C to +30° C in the original sealed container. Protect from frost and direct sunlight.
The information concerning the product is based on the results of laboratory tests and practical use of the product depending on the location and conditions of its use. As the manufacturer, we guarantee the quality of the product and provide the best recommendations for its appropriate application. As the manufacturer, we cannot control the conditions and circumstances of product transportation, storage and application and numerous other factors that affect its use. Thus, we shall not bear responsibility for the damage caused by ignoring the instructions for use or transportation, by noncompliance with storage conditions and timeframes or by inappropriate application of the product. The manufacturer reserves the right to alter product information at their discretion without prior notice.
Kulu arvutatakse 1 kihile
