Interior paint of a single layer
Colour: White
Consumption: The coating reaches its peak wash resistance in 3…4 weeks; treat the surface with care until its hardness and wash resistance have reached their peak levels. We recommend using water and neutral or mildly alkaline detergents (pH below 9) and a soft washcloth or microfiber cloth for cleaning. Do not use organic solvents, abrasive detergents or stiff brushes and rough sponges. Excessive rubbing may make the surface glossy. Wipe the surface dry after wet cleaning.
Drying time: At the temperature of +20 °C and the relative humidity of 80%, the surface is ready for the application of another coat in 1…1,5 hours. The surface is fully dry in 12 hours.
Volume / weight: 0,9L – 2,7L – 9L
Deep-matt acrylate water-borne paint for dry indoor walls and ceilings.
Gloss:
Wash resistance:
Opacity:
Painting walls and ceilings in dry residential and office spaces (children’s playrooms, rooms in childcare facilities, studies, living-rooms, bedrooms, offices, reception and meeting halls, hotels, hospitals, nursing homes, department stores, restaurants, public institutions etc.). Ideal for painting large areas. Not suitable for painting floors, doors and furniture.
Surfaces previously painted with latex, alkyd or oil-base paints or new surfaces made of concrete, aerated concrete, gypsum board; brick; surfaces finished with putty or plastered and surfaces covered with glass fibre wallpaper or other rolled finishing materials. For interior use.
The surface to be painted must be carefully cleaned from loose or peeling material, dirt, grease and dust. If mould removal is necessary, use Biotol E or Biotol Spray Sandpaper durable alkyd substrates until they are matt and remove the dust thoroughly. If the surface is very dirty, wash it with EasyClean. Use a putty from the FILLER line to fill cracks, holes and uneven areas. Sand the filled surface to make it even and remove sanding dust. Prime filled surfaces with Aquastop or Tiefgrund moisture barrier to reduce porosity. Follow the product instructions for use.
Stir the paint thoroughly before application. Mixing tinted paint in one container is recommended. Apply with a roller or spray gun at the temperature between +10 °C and +25 °C and relative air humidity below 80%. Apply the paint evenly. Contrast substrates may require a second layer. When using a spray gun dilute the paint with water in the amount of 5% until it reaches working viscosity. Try to maintain a wet edge in the process of painting.
The coating reaches its peak wash resistance in 3…4 weeks; treat the surface with care until its hardness and wash resistance have reached their peak levels. We recommend using water and neutral or mildly alkaline detergents (pH below 9) and a soft washcloth or microfiber cloth for cleaning. Do not use organic solvents, abrasive detergents or stiff brushes and rough sponges. Excessive rubbing may make the surface glossy. Wipe the surface dry after wet cleaning.
Roller, airless spray gun (nozzle: 0.017–0.021′)’.
Wash with soap and water after completing work.
Store and transport in a tightly sealed container at the temperature between +5…30 °С. Protect from exposure to freezing and direct sunlight.
The information concerning the product is based on the results of laboratory tests and practical use of the product depending on the location and conditions of its use. As the manufacturer, we guarantee the quality of the product and provide the best recommendations for its appropriate application. As the manufacturer, we cannot control the conditions and circumstances of product transportation, storage and application and numerous other factors that affect its use. Thus, we shall not bear responsibility for the damage caused by ignoring the instructions for use or transportation, by noncompliance with storage conditions and timeframes or by inappropriate application of the product. The manufacturer reserves the right to alter product information at their discretion without prior notice.
Kulu arvutatakse 1 kihile
