Paint for radiator
Colour: White
Consumption: 6-10 m2/L.
Drying time: At the temperature of +20 °C and the relative humidity of 65%, the surface is dust-dry in 1,5 – 2 hours and ready for the application of another coat in 5–6 hours. If the temperature is lower and the humidity is higher, the drying takes longer accordingly. The paint coating reaches its peak hardness and wash resistance in about four weeks.
Volume / weight: 0.45L, 0.9L, 2.7L
Water-borne pint for radiator
Maximum permissible EU VOC content for this product (subcat. d): 130g/L; maximum VOC content in the product <130g/L.
Gloss:
Wash resistance:
For painting new heating radiators or radiators previously painted with water-dispersible, oil-based or alkyd coating products; wooden and primed metal parts and items indoors. Do not use for painting floors, stairs or items used in outdoor conditions.
Primed or previously painted metal surfaces and wooden surfaces.
The surface to be painted must be degreased and cleaned from peeling paint, dirt and dust; it must also be dry. We recommend using the Katto Cleaner detergent for cleaning metal radiators.
If the surface is very dirty or greasy, clean it with the EasyClean.
Sandpaper the surfaces previously painted with enamel or oil-bound paint until they are matt. Use the OPS PRO product for the removal of old varnish coatings if necessary.
Sand previously painted metal surfaces, clean them rom rust and peeling paint and treat with and anticorrosion primer. Pre-treat new metal surfaces with an anticorrosion primer.
Stir the paint thoroughly before application. Mixing a sufficient quantity of the tinted paint from several cans in one container is recommended for ensuring that the colour of large surfaces is even. Apply 1-2 coats with a brush or roller at the temperature between +10 °C and +25 °C and relative humidity not exceeding 80%. Application on warm radiators (up to 45 °C) is acceptable.
The coating reaches its peak wash resistance in about 4 weeks; in the meantime, treat the surface with care until its hardness and wash resistance have reached their peak levels.
If necessary, the surface can be lightly wiped with a soft sponge or cloth approximately 48 hours after paint application. We recommend using water and neutral or medium alkaline detergents (pH below 9) for cleaning.
Do not use organic solvents, abrasive cleansers and hard scrubbing brushes or sponges. Hard rubbing can make the surface glossy.
Brush, roller.
Clean the tools with water after completing work.
The product is not classified as hazardous according to CLP Regulation (EC) No 1272/2008. Warning! Hazardous respirable droplets may be formed when sprayed. Do not breathe spray or mist. Contains 1,2-benzisothiazol-3(2H)-one. May produce an allergic reaction. Keep out of reach of children. If medical advice is needed, have product container or label at hand. When operating, follow working safety standards and requirements. As a preventative measure it is recommended to use basic Personal Protection Equipment.
Avoid release to the environment. Dispose of the contents/containers in accordance with the current legislation on waste treatment.
Waste treatment methods: code 08 01 12- Waste paint and varnish other than those mentioned in 08 01 11, waste class (Regulation (EU) No 1357/2014): non-dangerous.
Store in a tightly closed container at the temperature between +5 °С and +30 °С. Protect from exposure to freezing and direct sunlight.
The information concerning the product is based on the results of laboratory tests and practical use of the product depending on the location and conditions of its use. As the manufacturer, we guarantee the quality of the product and provide the best recommendations for its appropriate application. As the manufacturer, we cannot control the conditions and circumstances of product transportation, storage and application and numerous other factors that affect its use. Thus, we shall not bear responsibility for the damage caused by ignoring the instructions for use or transportation, by noncompliance with storage conditions and timeframes or by inappropriate application of the product. The manufacturer reserves the right to alter product information at their discretion without prior notice.
Kulu arvutatakse 1 kihile
